Storico Bandi & Premi

NON SVOLTO

NON SVOLTO

Primi 5 classificati

1° classificato

“Comparison of the accuracy of an intraoral and an extraoral laboratory scanner on the totally edentulous maxilla: a 3D analysis.”
G. Ruggero, F. Sorrentino, R. Sorrentino (Università Federico II, Napoli, ITALY)

Leggi l’Abstract

2° classificato

“A pilot trial on lithium disilicate partial crowns using a novel prosthodontic Functional Index for Teeth (FIT)”
Edoardo Ferrari Cagidiaco, Cecilia Goracci, Tim Joda, Ph D Student, Department of Prosthodontics and Dental Materials University of Siena (Italy); Department of Periodontics Universidad Complutense de Madrid (Spain).

Leggi l’Abstract

3° classificato

“Accuracy of digital intraoral impressions for complete dentures manufacturing: comparison of three different protocols”
Nicola Scazzero, Francesca Firmo, Anna Zonaro, Domenico Dalessandri, Corrado Paganelli. Dental School, University of Brescia, Italy

Leggi l’Abstract

4° classificato

“Influence of implant position over the accuracy of intraoral optical surface scanning (IOS) for complete-arch implant impression: a randomized in vitro trial”
L. Arcuri, F. Lio, A. Papa, C. Lorenzi, A. Barlattani.

Leggi l’Abstract

5° classificato

“A novel digital workflow integrating navigation surgery and cad/cam guided prosthesis for immediate loading of single implants in the esthetic zone: a 1 year cohort study.”
P. Carosi, A. Pinto, N. Bianchi, V. Mazzetti, A. Pozzi

Leggi l’Abstract

Primi 6 classificati

Primo Premio

“Accuracy of the intraoral scanners in dental vertical preparation: an in vitro study.”
Andrea Marziali*, Lorenzo Scheda, Antonio Arena, Roberto Scotti, Carlo Monaco.

Leggi l’Abstract

Vincitori

1.

“Introduction of a novel Functional Index for Teeth Prosthodontic Score (FIT): A prospective study analyzing single-unit natural abutment crowns after three years of loading.”
Edoardo Ferrari Cagidiaco, Cecilia Goracci, Tim Joda. (1 Deparment of Medical Biotechnologies, Division of Dental Materials and Fixed Prosthodontics, University of Siena, Italy. 2 Department of Reconstructive Dentistry, University of Basel, Switzerland).

Leggi l’Abstract

2.

“Influence of Implant Scan Body (ISB) material and surface over the accuracy of intraoral optical surface scanning (IOS) for implant impression: A randomized in vitro trial”
Lorenzo Arcuri*, Alessandro Pozzi, Fabrizio Lio, Andrea Papa, Claudia Lorenzi, Liliana Ottria, Alberto Barlattani

Leggi l’Abstract

3.

“Implant-prosthetic rehabilitation using zygomatic implants and a carbon fiber framework”
Bagnasco Francesco*, Pesce Paolo, Tealdo Tiziano, Pera Paolo, Menini Maria (Division of Prosthodontics (Dep. DISC), University of Genoa)

Leggi l’Abstract

4.

“Resistance to load and marginal quality of composite CAD/CAM endocrowns with and without margin relocation”
Angerame D, De Biasi M, Lenhardt M*, Moratti M, Marchesi G.

Leggi l’Abstract

5.

“Brånemark Novum® immediate loading Rehabilitation of edentulous Mandibles: 16-year retrospective Study”
Luca Repetto* DDS, Paolo Pesce DDS, Phd, Francesco Bagnasco DDS, Paolo Pera MD, PhD, Maria Menini DDS, PhD (Department of Surgical Sciences (DISC), Implant and Prosthetic Dentistry Unit, University of Genoa, S. Martino Hospital (pad. 4), L. Rosanna Benzi 10, 16132 Genoa – Italy)

Leggi l’Abstract

6.

“Adhesion of 4 different impression marerials to Flock-PA66 covered dental tray”
Dott. Sebastian Tansella, Dott. Davide Battaglia, Dott. Silvio Taschieri, Prof. Dino Re

Leggi l’Abstract

Primi 5 classificati

Primo Classificato

“Influence of cervical margin relocation (CMR) on periodontal health: 12-mounth results of a controlled trial”
Marco Ferrari, Serhat Koken, Edoardo Ferrari Cagidiaco, Simone Grandini, Cecilia Goracci, Tim Joda, Nicola Discepoli

Leggi l’Abstract

Secondo Classificato

“The prototype concept in a full digital implant workflow”
Carlo Monaco, Lorenzo Scheda, Leonardo Ciocca, Giovanni Zucchelli

Leggi l’Abstract

Terzo Classificato

“Influence of conditioning protocol on resin cement adhesion to lithium silica-based glass ceramics”
Riccardo Fabian Fonzar, Michele Carrabba, Cecilia Goracci, Alessandro Vichi 

Leggi l’Abstract

Quarto Classificato

“Effect of occlusal-loading on microgap of implant abutment connection”
Marchesi G, Frassetto A, Cester M, Turco G, Di Lenarda R, Bevilacqua L, Maglione M

Leggi l’Abstract

Quinto Classificato

“Evaluation of three different scanning techniques in full-arch implants digital impression using intraoral scanners: a randomized controlled cross-over trial”
Di Fiore Adolfo, Meneghello Roberto, Graiff Lorenzo, Savio Gianpaolo, Turchetto Matteo, Stellini Edoardo

Leggi l’Abstract

Primi 5 classificati

Primo Classificato

““Removal of temporary cements from immediate sealed dentin: a comparison of cleaning methods.”
Davide Augusti, Gabriele Augusti, Francesca Parisi, Mutlu Özcan, Dino Re

Leggi l’Abstract

Visualizza il Caso

Secondo Classificato

“Survival of lithium-disilicate table-tops as a function of cement thickness”
Candida Parisi*1, Laura Facchini*1, Costanza Micarelli*2, Roberto Scotti*1, Paolo Baldissara*1

Leggi l’Abstract

Visualizza il Caso

Terzo Classificato

“Comparison between ultrasonic and rotating instruments in prosthodontic margin repositioning and finishing: in vitro evaluation of temperature increase in the pulp chamber ”
Bisagni E*, Oronos A, Baldi D, Menini M, Migliorati M, Pera P

Leggi l’Abstract

Visualizza il Caso

Quarto Classificato

“Which is the maximum load that adhesive resin-reinforced single crowns can withstand in molar regions?”
Arianna Infelise*, Roberto Sorrentino, Giovanni Bonadeo, Marco Ferrari

Leggi l’Abstract

Visualizza il Caso

Quinto Classificato

“A new methodology for the evaluation of the accuracy of digital implant impression for edentulous jaw”
Adolfo Di Fiore1, Roberto Meneghello2, Lorenzo Graiff1, Gianpaolo Savio3, Matteo Turchetto3, Edoardo Stellini1
1) Department of Neuroscience, Clinic of Dentistry, University of Padua.
2) Department of Management and Engineering, University of Padua.
3) Department of Civil, Architectural and Environmental Engineering, University of Padua.

Leggi l’Abstract

Visualizza il Caso

Primi 2 Classificati

Primo Classificato

“Comparison of fracture load of monolithic and veneered zirconia posterior fixed dental prostheses under static and cyclic loading.”
Tobar C*, Lopez-Suarez C, Rodriguez V, Serrano B, Suárez M J

Leggi l’Abstract

Secondo Classificato

“Translucency of monolithic hybrid tetragonal/cubic zirconia crowns vs lithium disilicate”
Scotti R*, Colabianchi V, Monaco C, Casamenti A, Baldissara P

Leggi l’Abstract

Primi 5 Classificati

Primo Classificato

“Correlation between the occurrence of ΔY MLT in symmetric mandibular movements and different skeletal classes: a cephalometric and condylographic study”
Dr. Alessandro Carmignani, Dr. Roberto Carmignani, Dr. Markus Greven

Leggi l’Abstract

Secondo Classificato

“SEM Analysis of marginal precision between digital and classical impressions in single crowns”
De Francesco M*, Di Fiore A, Mastrorosa Agnini A, Sandri L.P, D’ Amelio M. Stellini E.

Leggi l’Abstract

Terzo Classificato

“Minimal invasive CAD/CAM hybrid-ceramic restorations: Preliminary clinical results”
Vuck Alexander*, Strub Jörg Rudolf, Guess Petra

Leggi l’Abstract

Quarto Classificato

“Correlation of Mandibular Lateral Translation (MLT) in symmetrical mandibular movements in condylography and MRI examination”
Silvia Cid*, Markus Greven

Leggi l’Abstract

Quinto Classificato

“Accuracy of different dental implant impression techniques comparing different impression materials and digital impression”
Menini Maria*, Pera Francesco, Pesce Paolo, Bevilacqua Marco, Gamalero Angelo, Pera Paolo

Leggi l’Abstract

Primi 5 Classificati

Primo Classificato

“Repeatibility of digital vs. conventional impressions”
Dr. Edoardo Evangelisti*; Dr. Carlo Monaco, Prof. Roberto Scotti

Visualizza il caso

Secondo Classificato

“Comparative analysis of three zirconia systems and metal-ceramic for posterior fixed dental prostheses: a 5-year prospective study”
Suarez MJ*, Gonzalo E, Peláez J, Cogolludo P, Castillo R, Serrano B

Visualizza il caso

Terzo Classificato

“Efficacy of a checklist for office-laboratory comunication: a clinical study on quality outcome of single crowns”
Andrea De Maria*, Guido Audenino, Marco Morello, Enrico Poglio, Mario Bresciano

Visualizza il caso

Quarto Classificato

“Injection molding carbon-fiber post: initial tests of a newly designed endodontic hollow post”
R. Tonini*, G. Cavalli, S. Salgarello,L. Bovolato

Visualizza il caso

Quinto Classificato

“Morphological and chemical characteristics of different titanium surfaces treated by bicarbonate and glycine powder air abrasive systems”
Dellepiane E*, Menini M, Piccardo P, Baldi D, Pera P

Visualizza il caso

NON SVOLTO

NON SVOLTO

Vincitori del contest – edizione 2019

Guarda la gallery dei partecipanti 2018

Sfoglia l’AIOP Photobook 1.0

Primi 2 Classificati

Primo Classificato

Dott. Andrea Savi

Visualizza il caso clinico

Secondo Classificato

Dr. Acatrinei, Dr. Ungureanu (Romania)

Visualizza il caso clinico